80w 24” x 32” Laser Engraving with refrigerant chiller - $200 (Jasper)
Report Ad
Whatsapp
Posted : Thursday, August 15, 2024 09:02 AM
This is a 900mm x 600mm bed 80 watt laser.
That roughly comes out to 32” x 24” bed.
The bed is fully adjustable either with the autofocus pen on the laser head, or using the buttons on the ruidia control panel.
The red dot pointer likes to come loose but can be tightened and aligned with the laser pointer.
A little air assist pump will come with the laser and it helps a great deal.
I also have a chiller that will be included.
Not the warm water recirculating chiller, this is an actual refrigeration chiller that you can set the temperature that it will cool the water down to.
Currently it’s set to 18.
5 Celsius which is 65 Fahrenheit.
The laser has a working water sensor that will cut power to the laser if water is not detected or not circulating.
You can test it by pinching the inlet side, the chiller will beep and the laser will not fire even if it’s in the middle of a job.
You can see from my pictures just some of the things I’ve engraved, and I can show loads more when you come to buy it.
I’ll also throw in
stock for the laser I milled for plaques I never made.
Price is $2000 firm on price, chiller alone is $500 since it’s a refrigerant chiller.
The machine is very heavy, so bring a trailer.
It doesn’t have wheels on it, so brute force to move will be needed.
Bring an extra person with you, and I can help too.
I’ve had it since may of ‘22.
I used it on and off, but nothing terrible.
Message me if you have questions not answered in this description or to schedule pickup.
• Phone : NA
• Location : Jasper,AL
• Post ID: 9102841334
Posted : Wednesday, September 04, 2024
Posted : Wednesday, September 04, 2024
Posted : Wednesday, September 04, 2024
Posted : Sunday, September 01, 2024
Posted : Thursday, August 29, 2024